Paintball Cylinder - offers from Paintball Cylinders Manufacturer supplier factory wholesaler and distributor

Site Map

Dean Chang Enterprise Co. Ltd
Telephone: +886-6-3558209
Fax: +886-6-3552639
Address: 9F, No.56，Sec.3，An-Ho Road., Tainan, Taiwan

Certification

You are here: Home -> Products -> Paintball Cylinders

Dean Chang Enterprise Co. Ltd specializes in Manufacturer, Supplier and Exporter Paintball Cylinders, CO2 Cylinders, Medical Oxygen Cylinders, Portable Oxygen Cylinders, Water Bottles, with a factory in Taiwan. It has always been our focus to manufacture finest products and to deliver them on time with attentive after-sales service. Our innovative spirit enables us to stay a step ahead of our competitors by providing the widest range products. Enquiries from global wholesalers, Distributors, buyers, agents and OEM/ODM are welcome.

Paintball Cylinders

001 : Paintball Cylinder
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
002 : Paintball CO2 Bottle
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
003 : Paintball Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
004 : Paintball Tank
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
005 : Paintball CO2
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
006 : Paintball CO2 Cylinder
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
007 : CO2 Paintball Cylinder
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
008 : CO2 Paintball Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
009 : Paintball CO2 Tank
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
010 : Paintball CO2 Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
011 : Paintball Air Cylinder
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
012 : CO2 Paintball Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
013 : Paintball CO2 Bottles
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
014 : Paintball CO2 Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
015 : CO2 Paintball Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
016 : Paintball Bottles
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
017 : Paintball Gun Cylinder
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.

Specification:
CO2 SYSTEM

AIR SYSTEM

Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators

Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.
018 : Paintball Gun Tanks
Paintball Cylinder
DCEC Paintball CO2 and HP Cylinder act as a propellant in paintball markers.
DCEC Paintball Cylinders are made from high strength aluminum alloy AL6061-T6. Every cylinder has to be inspected by independent inspection third party to ensure the quality and safety. DCEC Paintball CO2 and HP Cylinder has been approved and tested by US DOT3AL, Canadian TC3ALM, and European TPED regulations. For the past six years, DCEC has been obtaining positive recognition on Paintball CO2 and HP tanks throughout the world. Our US representative has been working hard to promote Paintball CO2 and HP tanks in North America, aiming to be a top five supplier in the Paintball Industry. Constantly, we have been attempting to break into the European market for Paintball CO2 and HP tanks. Currently, our representative has been successfully contracted with Paintball distributors in almost every country throughout Europe.
Specification:
CO2 SYSTEM
AIR SYSTEM
Finish- Cylinder provided with glossy and matte powder coating
Approvals- DOT3AL, TC3ALM, PI TPED
Accessories- We have suppliers for pin valves, on/off valves, and 3,000psi/4,500psi regulators
Notice:
1. Improper use, filling, storage or disposal of this cylinder may result in death, serious injury or property damage.
2. Valves must be installed or removed only by trained personnel
3. This cylinders must be filled only by properly trained personnel in P.1 and G-6..3 available from the Compressed Gas Association, Inc. 1725 Jefferson Davis Highway Arlington, VA 22202.

Our expertise has enable us to ensure finest

Paintball Cylinders

by subjecting our products to stringent quality control measures during each stage of production and while dispatch. We sincerely welcome all relevant friends all over the world to come for visit and cooperation!

By providing the most advanced products and unsurpassed levels of customer service and technical support,

Paintball Cylinders

makes it easy for paintball players of all levels to stay ahead of the game. Quality check is built into every stage of the Cylinders manufacturing process to ensure that our paintball cylinders consistently meet and surpass the most stringent industrial standards. Cylinders are regularly destroyed for verification of neck-forming, subjected to tests of hardness and tensile strength and crushed or bent to test internal wall integrity. At every stage of the manufacturing process, each cylinder undergoes a visual inspection and hydrostatic testing to pressures well in excess of rated specifications. We are successfully meeting the demands of Paintball Cylinders that are based on precision designs and quality tested components so as to deliver optimum functionality standards at customer's end. With an unmatched record for safety and performance, paintball cylinders have proven to be the strongest, safest and most durable available. Paintball cylinders manufactures to all major global specifications and in accordance with all major standards. We provide these products with different gradations in size and specifications customizable as per the clients' exact needs. Moreover, we offer the products at cost effective prices and ensure that they are delivered within the stipulated time.